How To Change Date On Citizen Eco Drive

                                  Denizen World Time Education Manual E784 Abbreviated instruction

This sentry is solar-powered. Betrayal the dial to low-cal and use information technology sufficiently charged.
To see details of charging fourth dimension, specifications and operations, refer to the instruction transmission: E784 didactics manual

Component identification

Setting the globe time

This sentinel tin can signal the fourth dimension around the world according to which of 26 time zones (offsets from UTC — Coordinated Universal Time) is chosen.

Pull the crown out to position ane.
The second hand points the time zone currently set.
Rotate the crown clockwise to select an area.
The hour and minute hands start moving every bit y'all finished to select an area.
- Date indication also moves synchronously.
When the hands and indication stop, Push the crown in to position 0 to terminate the procedure.

Table of time zones and representative places

Countries or regions may modify time zones for various reasons.
When using the watch in an surface area not listed in the tabular array, select an expanse name in the same time zone.

Setting summer time

The summer fourth dimension setting (SMT ON/OFF) you ready is applied to all the time zones of the world time.

one. Push button the crown in to position 0.

2. Press and release the button.
The 2d hand indicates the current summer time setting.

The watch returns to normal indication in ten seconds without whatsoever operation during the steps below.

3. Rotate the crown to switch the summer fourth dimension setting (SMT ON/OFF).

Each time y'all rotate the crown clockwise, the setting changes alternately.

4. Press the push to finish the procedure.

Setting the time and calendar

Before adjusting time and agenda, check the time zone of the time and calendar to set and its summer time status and adjust the setting of earth time and that of summer time (SMT ON/OFF) correctly.

Setting the fourth dimension

Pull the crown out to position 2.
The second paw points to 0 seconds and stops.
- Accommodate the reference position before fourth dimension and calendar adjustment if the 2d hand does not bespeak 0 seconds following the steps of "Correcting the reference position".
Rotate the crown to set hour and minute.
- When yous rotate the crown apace a few times, the manus/indication will motion continuously. To finish the rapid movement, rotate the crown in either management.
- Date indication likewise moves synchronously. Change of date indication shows it simply became AM.
- Date indication does non alter while moving the hands counterclockwise.
Push the crown in to position 0 in accordance with a reliable time source to terminate the procedure.

Setting the calendar

Push the crown in to position 0.
Printing and release the button.
The 2nd hand indicates the electric current summer time setting.
- Execute the next step within 10 seconds.
Press and hold the button for 2 seconds or more while the second hand indicates the summer time setting.
The second hand turns fully around and indicates the electric current year and month setting.
- Release the button when the second hand starts moving.
- The watch returns to normal indication in 30 seconds without any operation during the steps below.
Rotate the crown clockwise to adjust the year and month setting.
· If you rotate the crown quickly a few times, the paw will move continuously. To end the rapid motion, rotate the crown clockwise.
Rotate the crown counterclockwise to set the appointment indication.
Press the button to finish the procedure.

Correcting the reference position

Conform the reference position when the second hand does not indicate 0 seconds while the crown is in position 2.

Correct reference positions:

Hour, minute and 2d hands: 0 hour 00 infinitesimal 0 second
Appointment indication: "1" ON
Practise not accommodate the reference position when the watch indicates 11:fifty PM – 12:10 AM. Otherwise, the date indication may change incorrectly.

Pull the crown out to position 2.
Press and release the button.
All Reset is executed.
Rotate the crown to set the hour and infinitesimal hands to 0 hours 00 minutes.
- If you rotate the crown quickly a few times, the mitt will motility continuously. To stop the rapid movement, rotate the crown in either direction.
Push the crown in to position 1.
Rotate the crown clockwise to set the second mitt to 0 second.
- If you lot rotate the crown rapidly a few times, the mitt will move continuously. To stop the rapid movement, rotate the crown clockwise.
Rotate the crown counterclockwise to set the appointment indication to "1".
- When you rotate the crown quickly a few times, the indication will move continuously. To stop the rapid move, rotate the crown counterclockwise.
- Rotate the crown while pressing and holding the push to arrange the position finely.
Push the crown in to position 0 to finish the process.
The reference position is updated and the 2nd hand starts moving.
- Adjust the time and calendar after that.