How To Change Digital Safe Reset Lock Code

Stack-On gun safes are renowned for their excellent gun storage qualities. In add-on to ensuring your gun does not fall into the wrong hands, they too protect your gun from impairment caused by burn down and other environmental degrading agents.

Stack-On gun safes are equipped with acme-class locks. For security purposes, the locks differ in locking and unlocking procedures. Stack-On gun safes are bought with a default combination code. The default combination code is common to all Stack-On gun safe locks.

Once acquired, one has to reset the existing default combination lawmaking and input their desired, unique combination lawmaking. In other instances, i may feel the need to reset a combination code for reasons best known to them.

Changing the combination code of a Stack-On gun safe is not a direct procedure. One has to follow a sequence of steps in order to change the combination code of the rubber. The post-obit are the two main procedures used to reset Stack-On gun safes depending on the blazon of lock on the safe.

Table of Contents

1 Procedure #1
2 Procedure #2

Procedure #1

Input the correct combination code to open the prophylactic'southward door. With the safe's door open, printing the '*" key followed by the pound central on the keypad,
Input the condom'southward electric current combination key once again and press the pound key.
Input the new combination code that y'all want. It should be a vi digit figure followed by the pound key.
Echo this footstep again.
You tin examination your new combination by pressing the '*' key followed past your new combination and the pound sign. Your combination lawmaking is set.

When changing the combination lawmaking, ensure that you test the new combination with the safe'south door open ensure that the combination makes the locking bolts engage and undo.

Procedure #2

Open the safety's door using the current combination. On the inside of the door, at that place is a small blood-red button near the hinge. Printing the red button and release.
A yellowish low-cal volition plow on. You can just change the access code while the door is open up and yellow lite is on.
On the keypad, enter your new security admission code and confirm it by punching the '#' sign on the keypad.

Do non close the condom'due south door without testing whether your new code works. Enter the new code and printing the '#' sign with the safety open up to run into if the locks appoint and disengage. If the process was not successful, repeat the process to change your laissez passer code.

For more information, you lot tin read our side by side series on how to cull the all-time gun prophylactic.